Guide To Lay Vinyl Floorings Over Floorboards?

 

Vinyl flooring is very long-lasting and fits over almost all the flooring surfaces including concrete. Vinyl flooring is a product that has several layers of different types of materials that layover together to form a highly durable, and affordable flooring. Although the floorings come in different forms, planks are easy to installable with the slightest tools and measuring. The tough part of the job is the cleaning and leveling the concrete base. Here are few steps that you can follow on how you can lay your vinyl floorings on over boards.


1)  Prepare Your Support

To make the installation process easier, it is necessary to prepare the surface on which you can lay your floor. Vinyl can be placed on existing floors such as linoleum, laminate, and tile. The most important part while laying the vinyl is to have a level, clean and dry substrate. If the floor is rough (tiles joint, or any crack)  then try to use a level compound that will maintain your underlying. Vinyl is a resilient floor if you cover that it will show any dents in the substrate. Thoroughly clean the floor with detergents to remove any dirt or dust, and make sure it is burnt before you begin the process. If the surface is smooth, a primer is the best option to help the flooring adhere to the substrate.

2) Prepare Your Flooring

It is necessary that your flooring adjust at least 24 hours before the installation period to a minimum atmosphere temperature of 15 C. Unfold the flooring and cut it into similar shapes and sizes, leaving 15-20cm more to avoid running the material out at the end of the laying process.

3) Lay Your Flooring

To lay the vinyl flooring there is a general rule that you should follow while installing vinyl always follow the direction of the primary light source. If the room is small, such as a hallway flooring, the strips should run the room's length nevertheless of the light's direction. Apart from the flooring patterns, all strips should be laid in the opposite direction for a smooth surface.

Laying Methods

There are three ways to install your flooring, depending on the size and usage of your room. Consider having a small room with a lot of traffic you will have different laying methods for each size of the room.

Ø  for smaller rooms, a floating installation is sufficient enough. You can lay your vinyl flooring on the backing.

Ø  for medium rooms, a semi-floating installation will be enough. You can use the double-sided tape around the room to secure the flooring.

Ø  In large rooms, it is necessary to glue your vinyl floors.

Finishing Keys

For a smooth finish don't forget to add a plinth wherever you are installing your vinyl sheets, it will protect the edges of the vinyl sheets and the bottom of your wall and also make the cleaning process easier. It will also add delicacy to your final results.

There are many different varieties of vinyl floorings. Many people opt for the vinyl floor as it is moisture and stain-resistant and also cost-effective. The vinyl sheet comes in a neutral color as well which makes you feel relaxed such as the blue vinylflooring as it invokes feelings and making it ideal for relaxation purposes. People also prefer to install vinyl into the bathroom as well. If you want to install vinyl in your bathrooms you can install the waterproof bathroom flooring sheets as it is resistance to wet areas. Above there are some ideas on how you can install your vinyl sheets on flasboards and the same method can apply to almost anywhere you want to install your vinyl sheets.

Post a Comment

0 Comments